Introduction of product details
Efficient integrated sewage treatment equipment is a kind of current excellent multi-purpose sewage treatment products, the use of international excellent biological treatment process, set removal of BOD5, COD, NH3-N in one, suitable for domestic sewage and similar industrial organic wastewater treatment and reuse, can be buried under the surface, above the surface, equipment can be used as greening or other land, Generally do not need to build houses and heating insulation, automatic control, high efficiency and low consumption, do not need personnel management, no sludge reflux, simple operation, easy maintenance, wide range of application, good treatment effect. The effluent water quality after treatment is stable and can better meet the national emission standards and environmental protection requirements.
Ⅰ.Scope of applicatior:
1、Treatment water:standard type 1.0~50.0(m³/h),greater than 50.0(m³/h)need to be designed separately.
2、Raw water concentration :BOD5:standard type ≤250mg/L,enhanced type ≤400mg/L,more than 400mg/L
need to be designed separately.
3、The equipment is suitable for residential areas,hotels,docks,airports,shopping malls,hospitals,sanatori- ums,schools,slaughter and breeding,petrochemical,factories and mining and other industries of life pro- duction waste water treatment.
Ⅱ.Technological advantage:
1、Small floor space easy location,short construction period
2、Low investment in pipe network construction and operation man- Agement
3、Low noise,no odor,no impact on the surrounding Environment
4、The equipment runs automatical- ly and no special person is required to be on duty
5、New biochemical treat-ment technology contact oyidation method.Large biomass,strong process-ing capacity,no sludge swelling problem
6、Excellent material,strong impact re-sistance,corrosion resistance
Ⅲ.Work principle:
The design of integrated sewage treatment equipment is mainly for the treatment of domestic sewage and similar industrial organic sewage.The main treatment means is to use the more mature biochemical treatment technology-biological contact oxidation method.It consists of six parts;
(1)Anaerobic pool ;
(2)contact oxida- tion pool ;
(3)Sedimentation pool ;
(4)Disinfection pool and disinfection device ;
(5)sludge pool ;
(6)Air room;
The anaerobic pool is set up for denitrification treatment,and the YDT type stereoelastic fillers are set in the pool as the carrier of denitrifying bacteria.The nitrate ammonia and acid oxygen in the nitrification solution are reduced to nitrogen under the action of denitrifying bacteria,so as to achieve the purpose of denitrifica-tion.The effective residence time of the anaerobic pool is 2.5-3.5h,and the dissolved oxygen is controlled within ≤0.5mg/L.
(2)Contact oxidation pool:the sewage flows to the contact pool for biochemical treatment,the contact pool is divided into three levels,the residence time is 8h,(the contact oxidation time of the enhanced equipment can reach 8~12h)The filler is a new elastic filler,easy to conjunctival,no blockage,the gas-water ratio of the contact oxidation pool is about 15:1.
(3)Sedimentation pool:The biochemical sewage flows to the sec-ondary sedimentation pool,the secondary sedimentation pool is a vertical sedimentation,the surface load is<10m³/m2·h,and the sludge is raised to the sludge pool.
(4)Disinfection pool,disinfection device:disinfection pool according to the specification:“TJ14-74”standard is not less than 30 minutes,if the hospital sewage,disinfection pool can increase the residence time to 1~1.5h.The automatic chlorine dioxide generator developed and produced by our company can be used for disinfection treat-ment.The equipment can constantly change the dosage according to the size of the water output,so as to achieve the purpose of more water and more medicine,less water and less medicine.Other disin-fection devices can be prepared separately.
MBR is a biofilm method,which is a carrier flow bed moving bed biofilm reactor.MBBR integrated sewage treat-ment equipment is a new type of high-efficiency reactor between Activated sludge and fixed biofilm process.The fill- ers with a larger specific surface area in the reactor move freely in the water due to stirring.When the sewage contin-uously passes through the reactor equipped with moving fillers,it grows on the fillers to form a biofilm,and microor-ganisms on the biofilm multiply in large numbers.Heterotrophic and autotrophic microorganisms use C,N,P,etc.in the water for metabolism,thereby purifying the sewage.It not only has the advantages of the traditional biofilm method,such as shock load resistance,long sludge age and less excess sludge,but also has the high efficiency and operational flexibility of the Activated sludge.
Important note:
1.The above general data is for reference. Please consult the technical department of the company for specific parameters.
2.The voltage Hertz of the device is selected according to the specific situation of each country.